{"product_id":"p106","title":"P106","description":"\u003cp\u003eDirect replacement for the \u003cstrong\u003eZund P106 (3910780)\u003c\/strong\u003e, with no modification needed. Diamond polishing bit for acrylic on \u003cstrong\u003eZund\u003c\/strong\u003e cutting systems with the RM-L, RM-A, RM-A QC, RM-S, or R45-s router module. 1-edge diamond polisher with a 0.236 in (6.0 mm) diameter on a 0.236 in (6.0 mm) shank.\u003c\/p\u003e\n\n\u003cp\u003eSold individually.\u003c\/p\u003e\n\n\u003c!--specs--\u003e\n\n\u003ch3\u003eDirect OEM replacement\u003c\/h3\u003e\n\u003cp\u003eThe P106 replaces the \u003cstrong\u003eZund P106 (3910780)\u003c\/strong\u003e. It has a 0.236 in (6.0 mm) shank, 0.236 in (6.0 mm) diameter, 0.236 in (6.0 mm) cutting length, and 1.969 in (50.0 mm) overall length. If your router runs the Zund P106 now, this bit drops straight in. Not sure? Contact us before you order.\u003c\/p\u003e\n\n\u003ch3\u003eWhat a polishing bit does\u003c\/h3\u003e\n\u003cp\u003eA router bit leaves a frosted, tool-marked edge on acrylic. The P106 follows the cut with a diamond cutting edge that finishes the edge clear and smooth, so parts come off the table ready for display without a separate flame or buffing step.\u003c\/p\u003e\n\n\u003ch3\u003eDiamond cutting edge\u003c\/h3\u003e\n\u003cp\u003eZund lists the P106 as a diamond polisher. Diamond is much harder than carbide, which is what lets it leave a clear finish on acrylic and hold that finish over long runs.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\n\u003ch4\u003eHow do I know this fits my machine?\u003c\/h4\u003e\n\u003cp\u003eThe P106 fits Zund RM-L, RM-A, RM-A QC, RM-S, and R45-s router modules that take the \u003cstrong\u003eZund P106\u003c\/strong\u003e. It has a 0.236 in (6.0 mm) shank. It is the standard version without the stop ring, so it is not for the RM-A QC ARC automatic bit changer. Not sure which router you have? Send us your machine model and we will confirm before you order.\u003c\/p\u003e\n\n\u003ch4\u003eWhat materials does it polish?\u003c\/h4\u003e\n\u003cp\u003eAcrylic. It is a finishing tool, not a cutting bit, so rout the part first and polish the edge after.\u003c\/p\u003e\n\n\u003ch4\u003eWhat speeds and feeds should I run?\u003c\/h4\u003e\n\u003cp\u003eMaximum spindle speed is 41,000 RPM. Polishing settings depend on the acrylic, its thickness, and your machine. If you need help dialing in a clear edge, contact us. We run these machines every day.\u003c\/p\u003e\n\n\u003ch4\u003eHow do I know when to replace it?\u003c\/h4\u003e\n\u003cp\u003eWatch the finish. If polished edges start coming out hazy, streaked, or chipped where they used to come out clear, the diamond edge is worn.\u003c\/p\u003e\n\n\u003ch3\u003eGetting the most from your cutting table\u003c\/h3\u003e\n\u003cp\u003eA fresh bit is a good start. But if you are going through bits faster than expected, or edge quality has become inconsistent, the bit is rarely the whole story. Spindle speed, feed rate, depth per pass, material hold-down, and machine condition all affect how long a bit lasts and how clean it cuts.\u003c\/p\u003e\n\n\u003cp\u003eIt is worth asking: When was your machine last serviced? Are your parameters dialed in for this material? Is this the right bit for what you are cutting? Could your operators use time with someone who runs these machines every day?\u003c\/p\u003e\n\n\u003cp\u003eFlatbed Tools offers machine service, preventive maintenance, operator training, and workflow consulting. If something is not cutting right, reach out. We have probably seen it before.\u003c\/p\u003e","brand":"Flatbed Tools","offers":[{"title":"Default Title","offer_id":46416617668652,"sku":"641106","price":1500.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0343\/5259\/4988\/files\/FBT_IG3_1_2.jpg?v=1738012037","url":"https:\/\/flatbedtools.com\/products\/p106","provider":"Flatbed Tools","version":"1.0","type":"link"}