{"product_id":"rd602","title":"Rd602","description":"\u003cp\u003eDirect replacement for the \u003cstrong\u003eZund R602 (5226444)\u003c\/strong\u003e, with no modification needed. Coated V-bit for ACM and Dibond on \u003cstrong\u003eZund\u003c\/strong\u003e cutting systems with the RM-L router module. 2-flute 120° V-bit with a 0.433 in (11.0 mm) cutting diameter on a 0.315 in (8.0 mm) shank.\u003c\/p\u003e\n\n\u003cp\u003eSold individually.\u003c\/p\u003e\n\n\u003c!--specs--\u003e\n\n\u003ch3\u003eDirect OEM replacement\u003c\/h3\u003e\n\u003cp\u003eThe Rd602 replaces the \u003cstrong\u003eZund R602 (5226444)\u003c\/strong\u003e. It has a 0.315 in (8.0 mm) shank, 0.433 in (11.0 mm) cutting diameter, 120° V-profile, and 0.114 in (2.9 mm) cutting length. If your RM-L router runs the R602 now, the Rd602 drops straight in. Not sure? Contact us before you order.\u003c\/p\u003e\n\n\u003ch3\u003eWhat this bit is built for\u003c\/h3\u003e\n\u003cp\u003eZund lists the R602 as its ACM router bit, for aluminum composite panels such as Dibond, Alucobond, and Reynobond. The 120° V-profile cuts V-grooves, chamfers edges, and engraves crisp lines in the panel face.\u003c\/p\u003e\n\n\u003ch3\u003eCoated, 8 mm shank\u003c\/h3\u003e\n\u003cp\u003eThe R602 is a coated multipurpose V-bit, and it runs on a larger 0.315 in (8.0 mm) shank than most router bits. The heavier shank keeps the 0.433 in (11.0 mm) head stable through the cut.\u003c\/p\u003e\n\n\u003ch3\u003eCommon questions\u003c\/h3\u003e\n\n\u003ch4\u003eHow do I know this fits my machine?\u003c\/h4\u003e\n\u003cp\u003eZund lists the R602 for the RM-L router module, and it takes a 0.315 in (8.0 mm) shank. If you are not sure which router module you have, send us your machine model and we will confirm before you order.\u003c\/p\u003e\n\n\u003ch4\u003eWhat materials does it cut?\u003c\/h4\u003e\n\u003cp\u003eAluminum composite panel: Dibond, Alucobond, Reynobond, and similar ACM. For through-cutting other sheet materials, a spiral router bit is the better call. Reach out and we will help you pick the right one.\u003c\/p\u003e\n\n\u003ch4\u003eWhat speeds and feeds should I run?\u003c\/h4\u003e\n\u003cp\u003eMaximum spindle speed is 50,000 RPM. The right feed rate depends on the panel, groove depth, and your machine. If you need help dialing in settings, contact us. We run these machines every day.\u003c\/p\u003e\n\n\u003ch4\u003eHow do I know when to replace it?\u003c\/h4\u003e\n\u003cp\u003eWatch the groove. Burrs along the aluminum skin, a ragged V-profile, or a groove that no longer cuts to an even depth all mean it is time for a fresh bit.\u003c\/p\u003e\n\n\u003ch3\u003eGetting the most from your cutting table\u003c\/h3\u003e\n\u003cp\u003eA fresh bit is a good start. But if you are going through bits faster than expected, or edge quality has become inconsistent, the bit is rarely the whole story. Spindle speed, feed rate, depth per pass, material hold-down, and machine condition all affect how long a bit lasts and how clean it cuts.\u003c\/p\u003e\n\n\u003cp\u003eIt is worth asking: When was your machine last serviced? Are your parameters dialed in for this material? Is this the right bit for what you are cutting? Could your operators use time with someone who runs these machines every day?\u003c\/p\u003e\n\n\u003cp\u003eFlatbed Tools offers machine service, preventive maintenance, operator training, and workflow consulting. If something is not cutting right, reach out. We have probably seen it before.\u003c\/p\u003e","brand":"Flatbed Tools","offers":[{"title":"Default Title","offer_id":46416610754604,"sku":"640602","price":249.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0343\/5259\/4988\/files\/FBT_IG3_1_2.jpg?v=1738012037","url":"https:\/\/flatbedtools.com\/products\/rd602","provider":"Flatbed Tools","version":"1.0","type":"link"}