S3 L-1600 Without Extension - High Flow Conveyor Belt
A drop-in replacement High Flow conveyor belt for the Zund S3 L-1600 cutting table with no extension. We cut every belt to the exact length for your machine and extension, so there is no measuring and no trimming on your end. The High Flow belt moves more air than our Premium belt for a stronger hold on materials that shift under standard vacuum.
Why High Flow
The High Flow belt moves about 1.5 times the air of our Premium belt. The belt structure spreads vacuum more evenly across the surface, so hard-to-cut materials hold tighter and shift less during the cut. Shops running foam, rubber, textiles, corrugated, and small finished parts get a cleaner cut with less part movement, and can hold the same work with less vacuum power. Proven in customer production for more than a year.
Why gray
Gray belts go through an extra manufacturing step that applies a conductive coating to the surface. This makes the belt more durable and stops static buildup during cutting. The High Flow belt ships in gray. If you cut light-colored materials that need a non-coated white belt, contact us and we will talk through your options.
Ready to install
Every belt is cut to the precise length for your Zund S3 L-1600 with no extension. You do not measure and you do not trim. Drop it in, mount, and seam.
Cut-to-length belts are non-returnable, so double-check your machine model and extension before ordering. Not sure? Contact us before you buy and we will confirm your configuration.
You will also need
Hot melt glue applicator, glue cartridge, and seaming tape are sold separately. Contact us for the installation manual.
Common questions
What is the difference between the High Flow and Premium belt?
The Premium is the right belt for most cutting jobs on the Zund S3 L-1600. The High Flow belt is built for when standard vacuum hold is not enough, cutting fabrics, small finished pieces, dense rubber, or thick foam where material or cut parts tend to shift. It moves about 1.5 times the air of the Premium belt for a stronger hold. Not sure which fits your work? Give us a call.
How do I know this belt fits my machine?
This belt is cut specifically for the Zund S3 L-1600 with no extension. If you are not sure of your configuration, contact us before ordering.
Can I install this myself?
Yes. It is a drop-in swap with no machine modifications. Request the installation manual through our contact page and we will send it over. You will need a hot melt glue applicator, glue cartridge, and seaming tape to complete the install.
Standard vacuum hold is all most jobs need. See the Premium version of this belt.