K22e

Direct replacement for the Zund Z22 (3910315), with no holder modification needed. Single edge oscillating blade for through cutting on Zund flatbed cutting systems. 63° cutting angle, 79° wedge angle, and a max cutting depth of 0.551 in (14.0 mm).

Sold individually.

Direct OEM replacement

The K22e fits directly in place of the Zund Z22 (3910315). Same form, same fit, same geometry. No holder modification required. If your Zund runs the Z22 now, the K22e drops straight in. Not sure? Contact us before you order.

What is oscillating through cutting?

Through cutting means the blade cuts completely through every layer of the material, including any backing or liner, so the piece separates fully from the sheet. An oscillating blade moves up and down at high speed instead of dragging, so it handles thicker, denser material where a drag blade would deflect or stall.

Flat stock with 0.551 in (14.0 mm)of reach

The K22e is a single edge flat-stock blade with a max cutting depth of 0.551 in (14.0 mm). That depth, paired with oscillation, is what lets it work through thick sheet stock in one pass instead of forcing a drag blade through it.

Common questions

How do I know this fits my machine?

The K22e replaces the Zund Z22. If your machine takes that part number, the K22e fits. If you are not sure which blade your machine takes, send us your machine model and we will confirm before you order.

What do the cutting angle and wedge angle mean?

The K22e has a 63 degree cutting angle and a 79 degree wedge angle. The 63 degree cutting angle helps the blade track through the material with less drag, and the 79 degree wedge angle balances sharpness against edge durability. Together they give clean, consistent through cuts.

How do I know when to replace it?

Watch the cut quality. Ragged edges, material tearing instead of cutting cleanly, or pieces that do not separate fully from the sheet all mean the edge is dull. Replace the blade before it becomes a production problem.

Getting the most from your cutting table

A fresh blade is a good start. But if you are going through blades faster than expected, or cut quality has become inconsistent, the blade is rarely the whole story. Cut depth, speed, pressure, and machine condition all affect how long a blade lasts and how clean it cuts.

It is worth asking: When was your machine last serviced? Are your parameters dialed in for this material? Is this the right blade geometry for what you are cutting? Could your operators use time with someone who runs these machines every day?

Flatbed Tools offers machine service, preventive maintenance, operator training, and workflow consulting. If something is not cutting right, reach out. We have probably seen it before.