K701

Direct replacement for the Zund Z701 (5222972), with no holder modification needed. Single edge flat-stock blade for Zund flatbed cutting systems. 90° cutting angle and a max cutting depth of 0.984 in (25.0 mm).

Sold individually.

Direct OEM replacement

The K701 fits directly in place of the Zund Z701 (5222972). Same form, same fit, same geometry. No holder modification required. If your Zund runs the Z701 now, the K701 drops straight in. Not sure? Contact us before you order.

0.984 in (25.0 mm)of cutting depth

The K701 is ground from 0.039 in (1.0 mm) flat stock with a 90° single edge and a max cutting depth of 0.984 in (25.0 mm). That reach covers thick sheet material that shorter blades cannot get through in one pass.

Common questions

How do I know this fits my machine?

The K701 replaces the Zund Z701. If your machine takes that part number, the K701 fits. If you are not sure which blade your machine takes, send us your machine model and we will confirm before you order.

How do I know when to replace it?

Watch the cut quality. Ragged edges, material tearing instead of cutting cleanly, or pieces that do not separate fully from the sheet all mean the edge is dull. Replace the blade before it becomes a production problem.

Getting the most from your cutting table

A fresh blade is a good start. But if you are going through blades faster than expected, or cut quality has become inconsistent, the blade is rarely the whole story. Cut depth, speed, pressure, and machine condition all affect how long a blade lasts and how clean it cuts.

It is worth asking: When was your machine last serviced? Are your parameters dialed in for this material? Is this the right blade geometry for what you are cutting? Could your operators use time with someone who runs these machines every day?

Flatbed Tools offers machine service, preventive maintenance, operator training, and workflow consulting. If something is not cutting right, reach out. We have probably seen it before.