Skip to content
Summa 500-9822 50° DLC-Coated Blade

Summa 500-9822 50° DLC-Coated Blade

$180.00 - $180.00
$180.00
$180.00 - $180.00
$180.00

The Summa 500-9822 is a 50° asymmetric, DLC-coated knife for the Summa 500-9321 Corrugated Tool. 50° cutting angle and a max cutting depth of 0.197 in (5.0 mm).

Sold individually.

Cut Angle
50° cutting angle
Made Of
Fine Grain Tungsten Carbide
Blade Specifications
Edge Configuration
Single Edge
Max Cutting Depth
0.197in / 5.0mm
Compatibility
Machine Brand
Summa
Compatible Materials
3M VHB (Very High Bond Tape), Foamboard, Folding Carton, Magnetic Foil, Polycarbonate, Polyester, Pre-Mask, Sandblast Masking, Self Adhesive Vinyl, Transfer Paper, Windows Perf
OEM Cross References
Summa 500-9822

Made for the Summa Corrugated Tool

Summa designed the 500-9822 for its 500-9321 Corrugated Tool. If your Summa runs that tool, this is the knife it takes.

Asymmetric angle, DLC coating

The asymmetric 50° grind is built for burr-free cuts in corrugated board. The DLC (diamond-like carbon) coating is a thin, hard layer that reduces friction and keeps the edge sharp longer, which matters in abrasive board.

Common questions

How do I know this fits my machine?

The 500-9822 fits the Summa 500-9321 Corrugated Tool. If you are not sure which tool your Summa has, send us your machine model and we will confirm before you order.

How do I know when to replace it?

Watch the cut edge. Burrs, crushed flutes, or ragged edges on corrugated board where it used to cut clean all mean the knife is dull.

Getting the most from your cutting table

A fresh blade is a good start. But if you are going through blades faster than expected, or cut quality has become inconsistent, the blade is rarely the whole story. Cut depth, speed, pressure, and machine condition all affect how long a blade lasts and how clean it cuts.

It is worth asking: When was your machine last serviced? Are your parameters dialed in for this material? Is this the right blade geometry for what you are cutting? Could your operators use time with someone who runs these machines every day?

Flatbed Tools offers machine service, preventive maintenance, operator training, and workflow consulting. If something is not cutting right, reach out. We have probably seen it before.